Top 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.

Top 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.

Blog Article

Don't underestimate the forklift at work. If the procedure is bad, there will be major crashes in mins, and there are several mishaps including forklifts.

Case 1: The forklift cargo blocked the vehicle driver's view, and the individual ahead could not be located, causing a rolling accident.
Instance 2: In order to maintain the balance of the forklift when lifting hefty items, the employees used their body weight as the counterweight, which almost triggered casualties.
Instance 3: The size of the forklift freight surpasses the permitted width of the path and holds on the roadside shelf, which nearly triggers an accident.
Situation 4: Forklift is speeding and surrender throughout a turn.
Situation 5: The forklift chauffeur did not discover the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift raises the workers illegally, the forklift driver does not wear the seat belt, the forklift lifter falls and the vehicle driver is crushed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a seat belt and fell from the automobile when it rolled over and was crushed.
Forklift operation need to take note of these matters ：.

Beginning.
1. Before beginning, observe the environments, and after confirming that there are no challenges that impede the safety and security of driving, honk the horn initially and afterwards start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge should be safe prior to starting.
3. When the forklift begins with a load, the chauffeur should initially verify that the lots is steady and dependable.
4. The beginning has to be sluggish and consistent.

Driving.
1. When driving, the height between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast needs to be slanted in reverse. .
2. Do not raise the fork expensive when driving. When going into and leaving the job website or while driving, beware that there will certainly be no challenges overhead. When the load is taking a trip, the fork needs to not be increased too high, which will certainly impact the security of the forklift. .
3. After dumping, the fork must be lowered to the typical driving placement prior to driving. .
4. When transforming, if there are pedestrians or vehicles close by, the driving signal needs to be provided first. High-speed sharp turns are prohibited. High-speed doglegs will certainly trigger the lorry to lose lateral stability and topple. .
5. When the forklift is downhill, it is strictly prohibited to switch off the fire and slide, and it is forbidden to brake suddenly while driving with loads unless there are unique situations.
6. When the forklift is running, it must comply with the website traffic rules in the factory and must maintain a particular safety and security range from the vehicle in front. .
7. When the forklift is running, the load must be in the lowest position that does not hinder the driving, and the gantry ought to be correctly tilted back. The load shall not be raised except when piling or filling. .
8. The elevation of the lots have to not obstruct the motorist's sight. In special situations, when the item affects the forward vision, drive at a low rate when turning around.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it should drive safely at a reduced rate when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to stand on the fork to hold things and play a stabilizing function. .
12. If problems are located, they will certainly be repaired and reported in a prompt fashion, and they will never run with health problems or conceal them.

filling and discharging.
1. When fork-loading products, the range in between the two forks need to be readjusted as needed to make the lots of both forks balanced and not manipulated, and one side of the product should protest the rack. .
2. It is restricted to deal with a single fork or make use of a fork top or pull. In unique scenarios, safety indication should be established to remind bordering pedestrians. .
3. In the process of packing and dumping products, the forklift must be braked with the brake. .
4. The rate of the automobile should be sluggish and steady. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the load, and it needs to be noted that the fork idea should not touch other items or objects. The tons should be supported with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be slanted forward somewhat when the lots is decreased to allow for simple positioning of the load and extraction of the forks. .
6. It is restricted to fork items at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so regarding avoid the collapse of the goods and harm individuals. .
8. Straining is prohibited, and it is restricted to utilize forks to raise personnel to engage in high-altitude operations to prevent high-altitude dropping crashes. .
9. It is not permitted to make use of the brake inertia to slip, put, round or roll objects. .
10. It is not allowed to utilize forks to choose, transform pallet discharge.

Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you have to dump the goods or reduced the fork structure.
2. Draw the parking brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the driver does not leave the vehicle's line of sight and does not exceed 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance ought to be checked, and fuel, lubing oil and air conditioning water must be included.
2. Inspect the security performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature level are regular.
5. After the forklift is running, the exterior leakage must likewise be inspected and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You have to examine before leaving the automobile;.
2. When you experience someone before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be as well sharp to avoid the tendency of " totally free switching";.
6. Running up and down the slope needs to be sluggish and uniform, and no activating the slope is allowed.
7. Do not drive across the slope. When the slope is above 10%, the automobile needs to be driven backwards when going downhill;.
8. When the forklift workers carry the goods and move on, if they experience huge or heavy items and go to the vehicle driver's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the operation.
1. Solitary fork procedure is not enabled.
2. It is not enabled to raise the goods for cross country driving.
3. It is not allowed to pick up the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not enabled to use inertia force to get the goods.
6. It is not permitted to use stopping pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring individuals to work on the Stand-on Electric Pallet Stacker pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Car park is not permitted under the following conditions.
1. Contours, slim roadways, train crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section with the same length as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn Stand-on Electric Pallet Stacker
Phone：+86 13827083844